The APTMS tilt mount features a universal design that allows you to mount the vast majority of LED/LCD/Plasma TVs in the 23-37" size range. Specifically, the APTMS supports hole patterns up to 17.25" horizontally by 12.25" vertically and VESA hole patterns up to 400x200mm. The APTMS is designed with a slim 1.9" profile yet still offers up to 15° of forward tilt. The APTMS is constructed with 5 LBS of 100% High Grade Steel providing a sturdy and reliable mount. The 19.25" wide wall plate will support two stud installation for studs up to 19" apart (most US homes have studs which are 16" apart). The two arm brackets attach to the TV separate from the wall plate allowing for easy "Lift n Lock" installation. Each arm bracket includes a safety screw to prevent accidental liftoff. The wall plate includes a built in bubble level and a separate 6" 3-Axis magnetic bubble level is provided as well. The paint is a high quality textured powder coat paint. The mount ships with all necessary mounting hardware.

The APTMM tilt mount features a universal design that fits most LED/LCD/Plasma displays from 32 to 55". Specifically, the APTMM supports hole patterns up to 27.7" horizontally by 19" vertically as well as VESA hole patterns up to 600x400mm. The APTMM is designed with a slim 1.9" profile as well as 15 degrees of downward tilt depending upon the size of your TV. The APTMM is constructed with 8LBS of 100% High Grade Steel providing a sturdy and reliable mount. The APTMM solid wall plate allows for quick and easy installation and will support installation to studs up to 28" apart (most homes are constructed with either 16" or 24" wood studs).

This is a very substantial mount with Dual arms and heavy guage steel. The arms extend over 20" from the wall yet fold to less than 5". Even at full extension, this mount has very little sag or twist. It is rated for up to 165lbs and most displays 55" and smaller weigh under 100lbs. The unit has dual tilt adjustment knobs and it will tilt forward or back 15 degrees. The wall plate is 19" wide and has wide slots making it easy to mount into standard 16" studs even if they are not exactly 16" apart. Thus, the arms may be visible on the sides of 32" units. The universal design will fit any display with a hole pattern up to 26.3" wide and 18" tall. The wall plate is 1/8" thick and very stable and includes a large center hole for cable pass-though into the wall. This mount will swivel approximately 150 degrees depending on the size of your display. Dual TV locking screws are included to prevent accidental liftoff of the display. Installation instructions and hardware included.

THIS LOW PROFILE FIXED MOUNT IS ENGINEERED TO FIT SMALL TO MEDIUM FLAT AND ULTRA THIN SCREENS. IT IS UNIVERSALLY ADAPTING TO VESA MOUNTING HOLES 400 X 300 (15.75"HORIZONTAL X 12" VERTICAL). MANUFACTURED FROM COLD-ROLLED LASER CUT HARDENED STEEL AND THEN FINISHED WITH A POWDER COAT IN LUSTROUS PIANO BLACK FOR YEARS OF RUST, DENT AND SCRATCH RESISTANCE. THE MODEL (SF) HAS BEEN INDEPENDENTLY CERTIFIED TO RESIST DEFLECTION TO 99 LBS. THE MOUNT IS SUITABLE FOR 16" STUDS OR SOLID MASONRY WALL ONLY. THE (SF) IS 5 STAR SAFETY RATED WITH 2 SAFETY SCREWS. OWNERS MANUAL, ALL MOUNTING HARDWARE, AND FREE HDMI CABLE ARE INCLUDED IN THE BOX. NO ASSEMBLY REQUIRED.

VLT15-B1 Features: -Tilting mount. -Visionmount Tilting Mounts Series. -Color: Black. -Super Slim tilting mount sits just .82'' from wall to complement the sleek look of ultra-thin TVs. -Adjustable Virtual Axis provides up to 10 of tilt and easily adjusts to accommodate TVs with varying depths. -ProSet post-installation height and leveling adjustments allow TV to be perfectly positioned after hanging. -Innovative ClickStand holds TV away from wall for easy cable access without having to remove TV. -Convenient quick-release tabs stay hidden behind TV, but easily pull down to unlock it from wall plate for cable access. Specifications: -TV Size Range: 37'' - 65''. -Maximum TV Weight: 150 lbs. -Mounting Pattern: Universal. Instruction Sheet Technical Drawing Sheet

A SUPERBLY ENGINEERED MOUNT. THE 44N IS ONE OF THE FINEST TV MOUNTS IN THE WORLD FOR ITS SIZE CATEGORY. PATENTED BUILT IN SHOCK ABSORBERS PROVIDE EXTREMELY SMOOTH ROTATION AND ADJUSTMENT AND REDUCE THE STRESS ON THE BACK OF YOUR FLAT OR ULTRA THIN SCREEN TELEVISION. BUILT IN LEVEL. THE 44N ALSO HAS PATENTED MECHANISMS ALLOWING FOR FINGER TOUCH SCREEN LEVELING AND TILT ADJUSTMENT. THIS PRODUCT COMES PRE-ASSEMBLED AT THE FACTORY, HAS LOCKING CAPABILITIES, AND FULL CABLE MANAGEMENT. THIS MOUNT HAS A FULL 180º ROTATION, 18" EXTENSION, AND +/-15º TILT. ****THIS MOUNT HAS A VESA OF 400 X 400 IT WILL FIT YOUR TV IF THE HORIZONTAL DISTANCE BETWEEN THE MOUNTING HOLES ON THE BACK OF YOUR TV IS 16 INCHES OR LESS AND THE VERTICAL DISTANCE (TOP TO BOTTOM) OF THESE MOUNTING HOLES IS 16 INCHES OR LESS.***** THIS PRODUCT HAS A MAXIMUM CAPACITY OF 99 POUNDS.

Designed for small to medium flat screen televisions. This mount has a universal VESA interface for up to VESA 400 X 300. The body and the arms are made from cold rolled hardened steel and then finished with a piano black powder coat. This mount will resist chipping, denting for years of trouble use and has been independently certified to resist deflection for TV's up to 99 pounds. Tilt +/-15º. This product is pre-assembled and comes with a free 5 foot high speed HDMI cable. All mounting hardware and instructions included. One year warranty.

SANUS ML22-B1 VisionMount Low Profile Mount for 15 to 40 Inch LCDs. The VisionMount ML22 is a low profile wall mount for medium LCD TVs. Its powder coated steel construction offers a sleek, high tech look while providing strength and durability. TV is positioned just 1 inch from the wall for a clean appearance. Universal mounting pattern including VESA 400 x 200 fits virtually any 15 to 40 inch LCD TV or monitor up to 100 lbs.

This Universal Tilt Wall Mount offers quality, versatility and security for 23-37 inch Flat panel televisions. The Universal Tilt Wall Mount features a high capacity and low profile design, about 1.9" depth from TV to wall, adjustable tilt for optimal viewing. Will This mount Fit my Plasma TV? First, check the weight of your TV. It must be less than 165 lbs. Second, look at the back panel of your TV. If your TV has 4 holes or 6 holes on the back of the screen, measure the vertical and horizontal distance between the holes, if the vertical distance is within 14", horizontal distance within 18", then this bracket will fit. Third, the width of your TV should be 20" above. Otherwise the mount is too wide to hide behind your TV.

The VisionMount LL22 is a low-profile wall mount for 30" – 60" flat-panel TVs. Sanus System's unique ProSet™ post-installation height and leveling adjustments ensure TVs are always perfectly positioned after hanging. Quick-release tabs allow the TV to unlock instantly from the wall plate for easy installation, while its low-profile design places the TV nearly flush to the wall for a clean appearance. The innovative ClickStand™ feature holds the TV away from wall for easy cable installation and maintenance, then snaps shut to secure the TV to the wall plate. The LL22 features an open wall plate design that provides ample room for cable routing, and ClickFit™ technology allows a surge protector to attach easily to the center of the mount, so it stays hidden yet easily accessible. The TV can also be shifted left and right on the wall plate for perfect placement, even with off-center studs. Powder-coated steel construction offers strength and durability. Universal mounting pattern fits virtually any 30" – 60" flat-panel TV up to 175 lbs.